Skip to main content
Skip to main content
Mobility Aftermarket Australia and New Zealand
to be added

CS LD 1.0 – Leak Detector

CS LD 1.0

CS LD 1.0

CS LD 1.0 with box

CS LD 1.0 with box

CS LD 1.0 usage

CS LD 1.0 usage

CS LD 1.0
CS LD 1.0 with box
CS LD 1.0 usage

The CS LD 1.0 is a single-sensor leak detector for all common refrigerants in one tool. Compatible with CFC, HCFC, HFC, HFO (including R32, R134a, R1234yf, R454A), hydrocarbons (R290, R600, R600a), tracer gas (95%N2/5%H2), and ammonia (NH3).

Its unique leak tracing mode displays raw signal output for precise leak location. The intelligent circuit alerts for filter changes, detects sensor faults or contamination, and provides automatic purging.

A large, high-contrast graphic LCD remains visible in bright or dark environments. Features include rapid warm-up (under 30 seconds), automatic/manual reset modes, and intuitive operation.

Powered by a rechargeable battery offering up to 8 hours per charge, with mains or USB vehicle charging. The rugged IP51-rated housing includes an anti-slip handle.

The CS LD 1.0 is backed by a 2-year warranty.

More Information

  • Detects Halogenated CFC, HCFC, HFC, HFO compounds,HC refrigerants, Tracer Gas (95 % N2/5 % H2 mixture),ammonia, butane and propane.
  • Meets or exceeds EN14624 performance standards.
  • Ultimate Sensitivity of less than 1 g/yr.
  • Electronic sensor lasts >5 years.
  • Large 61 mm backlit graphic LCD.
  • Audible alarm with Mute and Visual Leak Size Indicator.
  • Leak tracing mode to pinpoint hard to find leaks.
  • Rubber keypad provides positive actuation and tactile feedback.
  • Ergonomic design with TPU overmold and ambidextrous operation.
  • Includes carrying case, spare filters and battery charger.
  • 2-year warranty.
Property CS LD 1.0
Property
Sensor life
CS LD 1.0
> 5 years
Property
Power Supply
CS LD 1.0
5V DC 1.0 A charger
Property
Battery
CS LD 1.0
Li-Ion 3350 mAh Battery
Property
Operating Time (full charge)
CS LD 1.0
Approx. 8 hours continuous
Property
Battery Charge Time
CS LD 1.0
Approx. 3 hours
Property
Battery Charging Temperature
CS LD 1.0
0°C to 45°C
Property
Warm up time
CS LD 1.0
Normally 20 - 30 seconds, 45 seconds Max.
Property
Operating Environment
CS LD 1.0
Indoor/Outdoor Use
-20°C to 50°C and 0 to 95% RH, non-condensing
Note: Use in temperatures below 0°C should be limited. Extended warm-up time is recommended before use in low temperature environments
Property
Storage Environment
CS LD 1.0
-20°C to 65°C and 0 to 95% RH, non-condensing
Property
LCD
CS LD 1.0
61 mm; 240 x 320 Pixels full colour display
Property
Warranty
CS LD 1.0
2 years (includes battery), Sensor warranty of 30 days
Property
IP Rating
CS LD 1.0
IP51
Property
Altitude
CS LD 1.0
<3000 m
Property
Pollution Degree
CS LD 1.0
4
Property
Dimensions (excluding probe)
CS LD 1.0
216 x 83 x 51 mm
Property
Overall probe length
CS LD 1.0
413 mm
Property
Weight
CS LD 1.0
452 g
  • The CS LD 1.0 Leak Detector Unit
  • A transport/carrying case
  • Five spare filters (replacement filter tips)
  • A USB charging block and charging cable
  • The original instructions/manual
Segment Catalogue
> Learn more
Brochure
> Learn more

Further products

ACS 653

ACS 653
– air conditioning service unit for R134a

Read more
ACS 753 Andiamo

ACS 753
– air conditioning service unit for R134a

Read more
Service training

Service Training
Training Solutions

Read more