Skip to main content
0 684 200 704

EPS 100 – nozzle holder tester

EPS 100 nozzle holder tester

EPS 100 nozzle holder tester

EPS 100 nozzle holder tester

EPS 100 nozzle holder tester

EPS 100 nozzle holder tester
EPS 100 nozzle holder tester

The EPS 100 has a well-proven design with high accuracy (+/- 2.4 bar), finely scaled pressure gauge (2.0 bar increments).

The Bosch EPS 100 makes it easy for you to test and adjust the opening pressure to nozzle holder combinations, analyze the injection spray pattern distribution, leak test and chatter properties.

More Information

  • Reduced total error (+/- 2.4 bar) to give highly accurate test results: For efficiency
  • Accurate analysis: For informing adjustments to prevent engine idling vibrations
  • Manual hand operating lever with ergonomic hand grip: For ease of use
  • Transparent fuel container with filter: For immediate visibility of fuel leakages
  • Shut-off valve to isolate the pressure gauge while operating hand lever at speed: For analysis of chatter groups
  • Must be used with EPS 738 accessory: For enabling direct extraction of the oil mist and diagnostics of injectors on conventional vehicle types.
For nozzle holder assembly testing of nozzle type P, R, S, T
For nozzle holder assembly testing of nozzle type
Carried out Tests
P, R, S, T
Opening pressure
Spray shape
Fit tightness
Assembly tightness
Chatter behavior
For nozzle holder assembly testing of nozzle type
Display
P, R, S, T
Pressure gauge: 0 to 400 bar
Pressure gauge: 0 to 40 MPa
For nozzle holder assembly testing of nozzle type
High pressure line connection
P, R, S, T
Connecting thread for test pressure line: M14 x 1,5 mm
Test oil reservoir Filling quantity of test oil reservoir: 600 ml
Filter in test oil reservoir with purity to ISO 4020-2: 330 000 (approx. 15 µ)
Test oil reservoir
Test medium
Filling quantity of test oil reservoir: 600 ml
Filter in test oil reservoir with purity to ISO 4020-2: 330 000 (approx. 15 µ)
Clean test oil: ISO 4113 CV AW
Test oil reservoir
Test oil temperature
Filling quantity of test oil reservoir: 600 ml
Filter in test oil reservoir with purity to ISO 4020-2: 330 000 (approx. 15 µ)
23 °C ± 5 °C
Test oil reservoir
Weight
Filling quantity of test oil reservoir: 600 ml
Filter in test oil reservoir with purity to ISO 4020-2: 330 000 (approx. 15 µ)
4 kg
Test oil reservoir
Extraction device
Filling quantity of test oil reservoir: 600 ml
Filter in test oil reservoir with purity to ISO 4020-2: 330 000 (approx. 15 µ)
For environmental reasons extraction device EPS 738 necessary
  • Nozzle tester with pressure gauge and test oil reservoir
  • Test pressure line M14 x 1,5 / M12 x 1,5
  • Test pressure line M14 x 1,5 / M14 x 1,5
  • Pressure gauge 0-40 MPa as well as 0 – 400 bar on same scale
    accuracy class 0.6 DIN EN 837-1
    Pressure gauge adaption M20 x 1,5
EPS 738 Extraction device 230 V/ 50 Hz  
0 684 200 702
Test pressure line M14 x 1.5 / M16 x 1.5 
1 680 750 087
Reduction adapter M14 x 1.5 / M18 x 1.5 
1 680 362 000
Reduction adapter M14 x 1.5 / M22 x 1.5  
1 680 362 001
Reduction adapter M14 x 1.5 / M24 x 1.5  
1 680 362 044
Reduction adapter M14 x 1.5 / M26 x 1.5 
1 680 362 002
Reduction adapter M14 x 1.5 / M27 x 1.5         
1 680 362 045
Injector needle test accessories for whole pintle nozzle
1 688 130 153
Metal oil tank with cover                                  
1 685 400 029
UI(N) Adapter kit for commercial vehicle (Iveco, Scania and Volvo)        
1 687 010 147
UI(N) Adapter kit for commercial vehicle (Iveco and Detroit Diesel)        
1 687 010 338
UI(P) Adapter kit for passenger cars (VW Group)
1 687 001 857  
UI Adapter for Nissan                                     
1 681 335 111
Broad range of retrofit kits and repair tools
Segment Brochure